Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 250
236
Index is 2, OUI value is 123402
Index is 3, OUI value is 123403
Index is 4, OUI value is 123404
Index is 5, OUI value is 123405
WLAN-ESS 1 is link-up
Port mode is userLoginWithOUI
NeedToKnow mode is disabled
Intrusion Protection mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
After an 802.1X user gets online, you can see that the number of MAC addresses stored is 1.
# Display the 802.1X user connection.
<AC> display connection
Index=1,Username= test@sun
MAC=12-34-01-00-11-11
IP=10.1.0.1
IPv6=N/A
Total 1 connection(s) matched.
<AC> display connection ucibinedx 1
Index=2054, Username= test@sun
MAC=12-34-01-00-11-11
IP=10.1.0.1
IPv6=N/A
Access=8021X ,AuthMethod=CHAP
Port Type=Wireless-802.11,Port Name=WLAN-DBSS1:1
Initial VLAN=1, Authorization VLAN= N/A
ACL Group=Disable
User Profile=N/A
CAR=Disable
Priority=Disable
Start=2011-07-01 15:39:49 ,Current=2011-07-01 15:50:07 ,Online=00h10m18s
Total 1 connection matched.
Configuring the userLoginSecureExt mode on a WLAN port
Network requirements
Clients are wirelessly connected to the AC through port WLAN-ESS 1. The AC uses the RADIUS server to
authenticate its clients. If the authentication for a client succeeds, key negotiation is performed. If key
negotiation succeeds, the client can access the network resources.
The RADIUS server at 192.168.1.2/24 is the primary authentication server and the backup accounting
server. The RADIUS server at 192.168.1.3/24 is the backup authentication server and the primary
accounting server. The shared key for authentication and accounting is name.
All users use the default authentication, authorization, and accounting methods of the ISP domain sun.