Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 357
Advertising
343
Figure 145 Network diagram
Configuration procedure
# Configure the wireless access service, APs, and WLAN-ESS 0. (Details not shown.)
# Configure ARP filtering on the AC.
<AC> system-view
[AC] interface WLAN-ESS 0
[AC-WLAN-ESS0] arp filter binding 10.1.1.2 000f-e349-1233
[AC-WLAN-ESS0] arp filter binding 10.1.1.3 000f-e349-1234
After the configuration is complete, WLAN-ESS0 will permit incoming ARP packets from Client 1 and
Client 2, and discard other ARP packets.
Advertising
This manual is related to the following products: