H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 222)

208
3. Add a portal device:
a. Select User Access Manager > Portal Service Management > Device from the navigation tree to
enter the portal device configuration page.
b. Click Add to enter the page shown in Figure 108 .
c. Enter the device name AC.
d. Enter the IP address of the AC's interface connected to the user.
e. Enter the key, which must be the same as that configured on the AC.
f. Set whether to enable IP address reallocation. This example uses direct portal authentication,
and therefore select No from the Reallocate IP list.
g. Select Yes for both Support Server Heartbeat and Support User Heartbeat.
h. Click OK.
Figure 108 Adding a portal device
4. Associate the portal device with the IP address group:
a. As shown in Figure 109 , click the icon in the Port Group Information Management column of
device AC to enter the port group configuration page.
Figure 109 Device list
b. On the port group configuration page, click Add to enter the page shown in Figure 110 .
Perform the following configurations:
c. Enter the port group name.
d. Select the configured IP address group. The IP address used by the user to access the network
must be within this IP address group.
e. Use the default settings for other parameters.