H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 27
13
No. Attribute
Description
5
NAS-Port
Physical port of the NAS that the user accesses.
6
Service-Type
Type of service that the user has requested or type of service to be provided.
7
Framed-Protocol
Encapsulation protocol for framed access.
8
Framed-IP-Address
IP address assigned to the user.
11
Filter-ID
Name of the filter list.
12 Framed-MTU
Maximum transmission unit (MTU) for the data link between the user and NAS.
For example, with 802.1X EAP authentication, NAS uses this attribute to notify
the server of the MTU for EAP packets, so as to avoid oversized EAP packets.
14
Login-IP-Host
IP address of the NAS interface that the user accesses.
15
Login-Service
Type of the service that the user uses for login.
18 Reply-Message
Text to be displayed to the user, which can be used by the server to indicate, for
example, the reason of the authentication failure.
26 Vendor-Specific
Vendor specific attribute. A packet can contain one or more such proprietary
attributes, each of which can contain one or more sub-attributes.
27 Session-Timeout
Maximum duration of service to be provided to the user before termination of the
session.
28
Idle-Timeout
Maximum idle time permitted for the user before termination of the session.
31 Calling-Station-Id
Identification of the user that the NAS sends to the server. For the LAN access
service provided by an H3C device, this attribute carries the MAC address of the
user in the format HH-HH-HH-HH-HH-HH.
32 NAS-Identifier
Identification
that the NAS uses for indicating itself.
40 Acct-Status-Type
Type of the Accounting-Request packet. Possible values are as follows:
•
1—Start.
•
2—Stop.
•
3—Interim-Update.
•
4—Reset-Charge.
•
7—Accounting-On. (Defined in 3GPP.)
•
8—Accounting-Off. (Defined in 3GPP.)
•
9 to 14—Reserved for tunnel accounting.
•
15—Reserved for failed.
45 Acct-Authentic
Authentication method used by the user. Possible values are as follows:
•
1—RADIUS
•
2—Local
•
3—Remote
60 CHAP-Challenge
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication.