Grass Valley 8925DMB-B - Manual (Page 26)

26 8925DMB-B and -U — Instruction Manual
Remote Configuration
Web Page Headers
Each configuration web page has a Status and Identification Header similar
to the one shown in
Figure 10 below.
Note Information in the web page header will vary for some types of web pages.
Figure 10. Status Page Header
The header information on each web page includes the following:
• Model and Description are read-only generated by the module.
• Frame Location is defined on the 8900 Series GeckoFlex frame configura-
tion web page.
• Slot number reports the module’s location in the frame.
• Input Video Standard reports the input video type and rate selected on the
System Config web page.
• Input Video reports the status of the video input to the module.
• Fiber Module Type reports (on the Status, I/O Config, Video Input, and
Video Output web pages) the status or type of the fiber optic sub-
module with one of the following four messages:
• Not Installed,
• RX/TX, 1310 nm,
• Dual RX, or
• Dual TX, 1310/1310 nm.