Grass Valley 8925DMB-B User Manual
Page 27
8925DMB-B and -U — Instruction Manual
27
Remote Configuration
8925DMB-B and 8925DMB-U Links and Web Pages
The web interface 8900 GUI provides the following links and web pages for
the 8925DMB-B and 8925DMB-U modules (shown at left):
•
Status web page – reports input and output signals, frame bus commu-
nication status, module information, warnings and errors (
),
•
I/O Config web page – shows the presence of the signals on a specific
connector, allows naming of each input and enables or disables the
signal reporting (
),
•
System Config web page – set input video rate and line standards to be
accepted by the module (
),
•
Video Input web page – allows selection of the video input source and
provide the status of all sources, including fiber optic submodules
option inputs and indicates the embedded audio status (
•
Audio De-embedder web page – lists the audio outputs available,
allows selection of the stream to be de-embedded, selection of the reso-
lution, and reports stream status (
•
Video Output web page – enables/disables the fiber optic video output
when a fiber optic submodule is installed (
),
•
User Settings web page – allows recalling of factory defaults for all
module parameters or factory signal names and provides a save/load
configuration file function (
),
•
Slot Config web page – provides Locate Module, Slot Identification,
and Slot Memory functions along with links to the SNMP, LED
Reporting, and Frame Alarm configuration web pages (
).
A summary table of all module parameters including defaults, ranges, and
Newton Control panel controls is given in