Grass Valley NewsroomSuite v.5.5 - Manual (Page 127)

Genlock Settings
Digital News Production 123
Genlock Settings
Output Settings
Automation Settings
Setting Options Description
Enable Genlock On
Off Check this option to use Genlock with FeedClip. Genlock is the
synchronization of two television signals at the vertical, horizontal,
and chroma phase levels such that the signals may be cut, mixed, or
cross-faded without noticeable roll, jump, or chroma shift.
Horizontal Phase -5148 to +5148 Select the appropriate Horizontal Phase by moving the sliders, typing
the number, or using the up and down arrows.
Subcarrier Phase -180 to +180 Select the appropriate Subcarrier Phase by moving the sliders, typing
the number, or using the up and down arrows.
Use Defaults Click this button to return Genlock settings to their default positions.
Setting Options Description
Video Output Composite
S-Video
Component
Serial D1 Select the Video Output option that corresponds to the video
source’s connection to FeedClip.
If you are using the Pro D&A Break Out Box, the Component Y
output defaults to a second composite output unless you select
Component Video.
Audio Output Unbalanced Analog
Balanced Analog
AES/EBU
SDI Embedded Select the Audio Output option that corresponds to the audio
source’s connection to FeedClip.
Setting Options Description
Protocol None
Odetics Control Protocol Select Odetics Control Protocol if you are using an
automation system, like NewsQ Pro, to control your
FeedClip workstation; otherwise, select
None .
Comm Port None
COM1 - COM10 If you are using the Odetics Control Protocol, select the
COM Port to which it is connected.