Grass Valley NewsroomSuite v.5.5 - Manual (Page 49)

Assigning a COM Port for the Controller
Digital News Production 45
Assigning a COM Port for the Controller
To use any of the controllers, you need to assign a specific COM port in
NewsEdit for the controller. NewsEdit has pre-configured COM ports as
follows:
To assign a COM port:
1. In NewsEdit XT/LT/SC, choose Tools | Options | Controller .
COM Port Type of Port Configured Device
1 GPIO NewsQ GPIO
2
3 RS-422 Video Tape Recorder (VTR)
4 RS-422 Jog/Shuttle Controller
5 USB Motorized Fader Controller
6 USB Effects Controller