Grass Valley NewsroomSuite v.5.5 - Manual (Page 43)

Installing the XenaSD Driver and Control Panel
Digital News Production 39
Installing the XenaSD Driver and Control Panel
Once you’ve installed the XenaSD board and connected the cables, you need to
install the board’s driver and control panel.
Installing the XenaSD Driver
The driver for the XenaSD board is located on the NewsroomSuite CD, in the
Drivers | AJA directory. You can use either the Found New Hardware Wizard
or the Update Device Driver Wizard to install the XenaSD driver.
Installing the XenaSD Control Panel
1. Insert the NewsroomSuite CD into your CD drive.
2. Navigate to the Drivers | AJA directory.
3. Navigate to the XenaSDControlPanel directory.
4. Double-click on Setup.exe .
5. Install the control panel following the instructions on each screen.