Grass Valley NewsroomSuite v.5.5 User Manual
Page 75
Configuring SmartBins Service on a NAS or K2 System
Digital News Production
71
Configuring SmartBins Service on a NAS or K2
System
If you are using SmartBins on a NAS or K2 system, you need to configure your
M-Series iVDR(s), Profile XP, or K2 Media Server to use SmartBins.
NOTE: You don’t need to configure SmartBins on an Open SAN
system.
To configure the SmartBins Service on a NAS or K2 system:
1. Go to
Start | Programs | Vibrint 3.0 | SmartBins Setup Tool
.
The SmartBins Setup Tool opens.
2. Select the
Total Maximum Transfers
from the drop-down list.
The Total Maximum Transfers is the total amount of streams for this particular
instance of the SmartBins Service. Select
4
if the SmartBins Service is installed
on the DSM and select
6
if the SmartBins Service is installed on a standalone
PC.
NOTE: Increasing the number of Total Maximum Transfers affects
the bandwidth on the NAS system.
3. Click
Add
.