Grass Valley Kaleido-Solo Installation v.5.00 User Manual
Page 34
GUIDE TO INSTALLATION AND OPERATION
30 | Kaleido-Solo
Delay (SPDIF/Analog)
Delay can be added to the SPDIF and analog audio outputs, to compensate for a monitor video delay, so that the
audio timing can be matched to the video for lip sync. This control does not affect the audio inserted in the HDMI port.
Using the lip sync test signal (see section 5.2) will help when making this adjustment.
From the Delay (SPDIF/Analog) menu, press ENTER. The main menu disappears and only the adjustment slider
remains visible. This ensures that the test signal or video that is being used to adjust the audio delay is not obscured
by the menu.
Use the UP and DOWN buttons to adjust the audio delay until the timing is subjectively correct, then press ESCAPE to
go back to the Audio General menu.
The available delay range is 0 to 120 ms.