Grass Valley Kaleido-Solo Installation v.5.00 - Manual (Page 36)

GUIDE TO INSTALLATION AND OPERATION
32 | Kaleido-Solo
5.4.3 Audio - ALM
Some audio features are available in Kaleido-Solo model 910 only.
Dolby E Source (KS-910 only)
Kaleido-Solo (KS-910 only) can display audio level and peak from a Dolby E without decoding. This configuration is
used to set two logical Dolby E sources. Those logical sources can be accessed under Stereo Assignment. Once a
logical source is selected the Dolby E program config is reported in parenthesis in this selection.