Grass Valley PDX 218 - Manual (Page 20)

Chapter 2 Installing
2-2 PDX 218 Instruction Manual
Mounting the Slides in the Rack
Figure 2-1 shows the components of a right-hand rack slide set. Note that the chassis
section is already attached to the PDX 218. When mounting rack slides in the
equipment rack, bear in mind that the PDX 218 occupies 3 RUs.
Figure 2-1. Rack Slide Set for Right Side of Chassis and Rack
PDX 218 Chassis Section
Automatic
Stationary
10-32 PHS
10-32 PHS
Flat
Nut
Flat Nut Bar
Intermediate
Stop Latch
Rear
NOTE: Right-hand and left-hand stationary section is designated by the
RH and the LH marked on the rails. Stop latch holes should be towards
Rack