Removing and replacing the switch cable, Removing and replacing the switch cable -20, Removal of the switch and line in cables -20 – Grass Valley PDX 218 User Manual
Page 54: Chapter 3 service
Advertising
Chapter 3 Service
3-20
PDX 218 Instruction Manual
Removing and Replacing the Switch Cable
Figure 3-12 shows removal of the cable assembly that connects the Power Supply to
the rear panel switch (item 8 in Table 3-1). This assembly includes the switch.
Figure 3-12. Removal of the Switch and Line In Cables
9687-22
Remove
shield
1
Remove
ground
wire
Unplug
wires(2)
Remove wires
from power
supply
2
Press tabs on sides of
power cord connector
to remove through
rear panel
Press tabs on top &
bottom of power switch
to remove through
rear panel
3
Advertising