Grass Valley PDX 218 - Manual (Page 52)

Chapter 3 Service
3-18 PDX 218 Instruction Manual
Removing and Replacing the SCSI Distribution Board Power
Cable
Figure 3-11 shows removal of the cable that provides power from the Power Supply
to the SCSI Distribution board (item 6 in Table 3-1).
Figure 3-11. Removal of the SCSI Distribution Board Power Cable
9687-21
1
2
Remove three
nuts and remove
air baffle
Unplug
power cable
3
Remove power cable
wires from power supply
Black
Yellow w/red stripe
Black w/yellow stripe
Yellow
Yellow (two wires)
Black w/yellow stripe (two wires)
Black
(two wires)
Red
(two wires)