Grass Valley PDX 218 - Manual (Page 25)

PDX218 SCSI Cable Connections
PDX 218 Instruction Manual 2-7
To make SCSI cable connections refer to Figure 2-7 and:
1. Connect a SCSI cable from the PDX 218 SCSI Bus 2 connector to the Profile
system rear panel connector in the slot labeled DISK RECORDER Master.
2. Connect a SCSI cable from the PDX 218 SCSI Bus 1 connector to the Profile
system rear panel connector in the slot labeled DISK RECORDER Slave.
3. Connect SCSI Terminators to the unused SCSI Bus 1 and SCSI Bus 2 connectors
on the PDX 218.
The PDX218 connections shown in Figure 2-7 provide four 18GB disk drives to the
SCSI A bus and four 18GB disk drives to the SCSI C bus on the Profile system (or
SCSI A & B bus on a PDR100).