Switches and indicator lights – Polaris 2013 BRUTUS Owner's Manual User Manual

Page 21

Advertising
background image

20

Switches and Indicator Lights

Light Switch

The ignition switch must be in the ON
position to operate the headlights.

Press the top of the rocker switch
toward the dash to place the headlights
on high beam.

Move the rocker switch to the center
position to place the headlights on low
beam.

Press the bottom of the rocker switch
to turn off the headlights.

AWD/Differential Lock Switch

The AWD/Differential
Switch has three positions:
• All Wheel Drive (AWD)
• Differential Lock (2WD)
• Differential Unlock

Press the top of the rocker
switch to engage All Wheel
Drive (AWD). See page 66
for operating instructions.

Move the rocker switch to the center position to lock the dif-
ferential and operate in rear wheel drive. Press the bottom of
the switch to unlock the differential and allow the two rear
drive wheels to operate independently. See page 66 for differ-
ential lock operating instructions.

HVAC Switches (If Equipped)

If equipped with a Cab with
HVAC (Heat and Air Condi-
tioning):
• Fan Switch (OFF-Low-

Med-High)

• Air Conditioning (Press

top of switch to turn Air
Conditioning ON, bottom
for OFF)

• Temperature Control

Switch (Rotate clockwise to increase temperature, counter-
clockwise to decrease)

Wiper Switch (If Equipped)

If equipped with a cab with a
wiper, the front wiper switch
is located on the wiper motor
cover at the top of the front
window:
• Wiper Switch (OFF-Low-

High)

• Washer Switch (Press and

hold top of switch to acti-
vate window washer)

HIGH

OFF

LOW

AWD

Differential Lock

Differential Unlock

Fan

A/C

On-Off

Temp

Control

Wiper

Switch

Washer

Switch

Advertising
This manual is related to the following products: