Polaris 2013 BRUTUS Owner's Manual - Manual (Page 29)

28
FEATURES AND CONTROLS
Instrument Cluster
3. MPH / KM/H Display - MPH is displayed when the
instrument cluster is in the Standard mode. KM/H is dis-
played when the instrument cluster is in the Metric mode.
4. High Beam Indicator - LED icon illuminates whenever
the Headlamp switch is in the high beam position.
5. Fuel Level Indicator - LCD bar graph indicating current
fuel level. All segments will flash when the last segment is
cleared indicating a low fuel warning.
6. Clock / PTO RPM - Displays current time in either 12-
hour or 24-hour formats. When the PTO is engaged, PTO
RPM will be indicated instead of the clock.
7. Engine / Hydraulic Fluid Temperature Indicator - LED
icon illuminates when the ECM determines the engine is
overheating. The indicators will initially flash to indicate
the engine is overheating. The indicators will stay lit and
not flash if a severe overheating condition exists.
8. PTO Indicator - PTO is engaged when this is illuminated.
PTO RPM will be displayed in the Clock field (6) ONLY
when engine RPM is displayed in the Information Display
Area (2).
9. Check Engine MIL - Illuminated when the ECM has
detected a Diagnostic Trouble Code in the engine manage-
ment system.
10. Unit Lock - N/A on this model.
11. Hour Meter - Illuminates when the display (2) is showing
hours.
12. Low Oil Pressure Indicator - LED icon illuminates low
engine oil or hydraulic fluid pressure is sensed.
13. Gear Position Indicator - Displays gear selector position.
H = High
L = Low
N = Neutral
P = Park
-- = Gear Signal Error (shifter stuck between gears)
14. Power Steering System MIL - N/A on this model.
15. Glow Plug Indicator - Illuminated when the glow plugs
are active. Light goes out when the engine is ready to start.
16. Seat Belt Indicator - LED icon illuminates for 10 seconds
when the key is turned to the ON position. The lamp is a
reminder to the operator to ensure all riders are wearing
seat belts before operating the vehicle.
17. AWD/TURF Indicator - Illuminate to indicate how many
drive wheels are active. This will tell you if you are in
AWD, 2WD, or Turf.
18. ADC Indicator - N/A on this model.
19. Service Interval Indicator - Preset at the factory and
adjustable by the user, a flashing wrench symbol alerts the
operator that the preset service interval has been reached
and maintenance should be performed. The wrench icon
will flash for 10 seconds upon start-up once it reaches 0.
20. Unit of Measurement - Indicates the measurement (Trip
1, Trip 2, KM, MI, RPM) being displayed in the Informa-
tion Display Area (2).