Polaris 2013 BRUTUS Owner's Manual - Manual (Page 66)

65
OPERATION
Leveling The Ground Using Float
Raise the attachment arm (Item B) and tilt the bucket forward
(Item D).
Push the joystick all the way forward (Item AA) to activate
float.
NOTICE: Never drive forward when the attachment arm is in the
float position.
Drive backward to level loose material.
Pull the joystick backward (Item B) to unlock the attachment
arm from the float position.
Backfilling
Lower the attachment arm (Item A) and put the cutting edge of
the bucket on the ground (Item D). Drive forward to the edge
of the hole to push the material into the hole.
Tilt the bucket forward (Item D) as soon as it is past the edge
of the hole.
If necessary, raise the lift arms to empty the bucket.
A
B
C D
AA
A
B
C D