Polaris 2013 BRUTUS Owner's Manual - Manual (Page 6)

5
INTRODUCTION
Vehicle Identification Numbers
Record your vehicle's identification numbers and key number
in the spaces provided. Remove the spare key and store it in a
safe place. An ignition key can be duplicated only by ordering a POLARIS key blank (using your key number) and mating it
with one of your existing keys. The ignition switch must be
replaced if all keys are lost
.
Vehicle Model Number:
Frame VIN:
Engine Serial Number:
Key Number:
European Vibration and Noise
The driver-perceived noise and hand/arm and whole body
vibration levels of this machinery is measured per prEN
15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was
controlled as indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is depen-
dent on many factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or phy-
sique
• Ability of the worker to reproduce typical work during mea-
surements
• Environmental factors such as ambient noise or temperature
Engine Serial Number
Key
Number
####
VIN