HEIDENHAIN IK 5394-3D - Manual (Page 394)

5-34
Chapter 5 Tolerancing & Templates
Angle tolerance
Use angle tolerance to set tolerance values for angles in a specified plane. Enter
the respective nominal values for the angle according to its plane. For example,
enter XY nominal values for angles in the XY plane.
To perform an angle tolerance
Step 1
Highlight the desired angle in the features list.
NOTE
Use angles only. Angle tolerances do not apply to other types
of features.
Step 2
Click the angle button on the tolerance toolbar.
Step 3
Enter the nominal values as shown.
CAUTION
Enter tolerance values in the appropriate units of measurement.
For example, if you are measuring in metric (mm) enter tolerance
data in metric (mm).