SMA POWER REDUCER BOX - Manual (Page 24)

5 The Power Reducer Box User Interface SMA Solar Technology AG
24 REDUCERBOX-BA-en-16 User Manual
In the lower area all Sunny WebBoxes registered in the Power Reducer Box are listed with their
current communication status. A Sunny WebBox can have the following status:
Updating the Device Status
You can update the device status manually:
1. Select "Status" in the main menu.
2. Select [Refresh].
5.7 Events Page
All events of the Power Reducer Box, such as change to status or communication error, are logged
and displayed on the "Events" page. All events are saved in the internal memory. Once the internal
memory has reached its capacity, the oldest events will be overwritten. In addition you can download
events in CSV format as well as save events to an SD card.
Symbol Status Description
OK The communication between the Power Reducer Box and
Sunny WebBox is functioning is correctly.
Configuration failure There is a communication error between the Power Reducer Box
and the Sunny WebBox. This error is displayed if no
Sunny WebBox is selected.
Error There is a communication error between the Power Reducer Box
and the Sunny WebBox. There is communication with at least
one connected Sunny WebBox.
Error There is no configured ripple control signal.
Automatic update of the page content
The page content is automatically updated every 30 seconds.