SMA AUTOMATIC SWITCH BOX XL - Manual (Page 16)

Installation SMA Solar Technology AG
16 AS-BOX-XL-IEN094410 Installation Guide
4.2.2 Transporting the Automatic Switch Box
1. Remove all fastening screws from the base panel front and back.
2. Put the screws aside. The screws will be needed later to reattach the base panels.
3. Remove the base panels and set them aside.
4. Bring the fork of the lift truck, pallet truck, or crane into place under the Automatic Switch Box
and move the Automatic Switch Box to the installation location.
☑ The Automatic Switch Box is now located at the place of installation.