SMA AUTOMATIC SWITCH BOX XL - Manual (Page 45)

SMA Solar Technology AG Decommissioning
Installation Guide AS-BOX-XL-IEN094410 45
8 Decommissioning
8.1 Disassembling the Automatic Switch Box
1. Open the Automatic Switch Box as described in Section 7.1 ”Opening the Automatic Switch
Box” (page 44).
2. Remove all cables from the Automatic Switch Box.
3. Remove all fastening screws from the base panel front and back.
4. Put the screws aside. They will be needed later to reattach the base panels.
5. Unscrew and remove the fastening screws of the Automatic Switch Box.
6. Lock the enclosure of the Automatic Switch Box with the switch cabinet key.
7. Transport the Automatic Switch Box with a forklift, pallet truck, or crane. See Section
4.2 ”Transport” (page 15).
☑ The Automatic Switch Box is now disassembled.
8. Remount the base panels on the Automatic Switch Box.
8.2 Storing the Automatic Switch Box
Store the Automatic Switch Box in a dry place at an ambient temperature between − 25 °C and
+50 °C.
8.3 Disposing of the Automatic Switch Box
Dispose of the Automatic Switch Box at the end of its service life in accordance with the disposal
regulations for electronic waste applicable at the installation site at that time.