Yaskawa Tag Generator User Manual
Page 10
Advertising
11.
Select the radio button within the New Project dialog box to choose the software that will use the generated tag file.
Select “Logix Designer/RSLogix 5000” for EtherNet/IP or DeviceNet protocols.
Select “TIA Portal” for PROFINET or PROFIBUS protocols.
Figure 2 New Project Dialog Window
12.
Type a project name in the “Project Name” textbox.
13.
Click the “New Project” button.
14.
Refer to EtherNet/IP or DeviceNet Projects on page 11
for projects that utilize Logix Designer/RSLogix 5000.
Refer to PROFINET or PROFIBUS Projects on page 19
for projects that utilize TIA Portal software.
3 Install Software and Create a New Project
10
YASKAWA TOEP YAICOM 20A Tag Generator User Guide
Advertising