A1000 – Yaskawa Modbus TCP/IP Installation User Manual
Page 19
Advertising
5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual
19
3.
Make sure the screws on the left and right sides of the option terminal block (J) are
tightened with a tightening torque of 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs), then insert the
option (B) into the CN5-A connector (L) located on the drive and fasten it using one
of the included screws (H).
Figure 5
Figure 5 Insert the Option
L
H
B
J
A1000
Modbus_IM_E_conditional.fm 19 ページ 2012年11月5日 月曜日 午後4時32分
Advertising
This manual is related to the following products: