A1000 – Yaskawa Modbus TCP/IP Installation User Manual
Page 20
Advertising
5 Installation Procedure
20
YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual
4.
Connect the ground wire (I) to the ground terminal (K) using one of the remaining
provided screws (H). Connect the other end of the ground wire (I) to the remaining
ground terminal and installation hole on the option (B) using the last remaining
provided screw (H) and tighten both screws to 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs).
Figure 6
Figure 6 Connect the Ground Wire
Note: There are two screw holes on the drive for use as ground terminals (K). When connecting three
options, two ground wires will need to share the same drive ground terminal.
H
I
K
B
A1000
Modbus_IM_E_conditional.fm 20 ページ 2012年11月5日 月曜日 午後4時32分
Advertising
This manual is related to the following products: