A1000 – Yaskawa Modbus TCP/IP Installation User Manual
Page 27
Advertising
5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual
27
3.
Make sure the screws on the left and right sides of the option terminal block (H) are
tightened with a tightening torque of 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs), then insert the
option (B) into the CN5 connector (J) located on the drive and fasten it using one of
the included screws (C).
Figure 12
Figure 13 Insert the Option
J
H
B
C
A1000
Modbus_IM_E_conditional.fm 27 ページ 2012年11月5日 月曜日 午後4時32分
Advertising
This manual is related to the following products: