Yaskawa G5 Eliminator - Manual

Eliminator
Date: 07/01/04, Rev: 04-07 Page 1 of 27 TM.G5SW.015
GPD515/G5 Software Option (VSG114676)
Part Number: CIMR-G5MXXXXXF-015 (1)
With this factory-installed FLASH software, the
GPD515 / G5 becomes a configurable drive.
User Configurable software enhances the
standard drive software with embedded
functions. The drive may be operated as a
standard off the shelf drive or may be
configured to utilize the embedded functions.
The functions can be configured to create the
necessary control logic for many speed or
torque control applications. It is possible to
reduce the need for external control modules
and PLC’s. Whole control systems may be
integrated into a stand-alone GPD515 / G5
drive.
With this software, it is possible to read in
information and output it into other functions
from the following sources;
! All analog inputs
! All PG options
! Drive speed output
! Drive torque output
! Drive Hertz output
! Internal MOP
! Parameters
These sources can be input into the following
functions that perform operations to change
and control them. The following operations are
available;
! Add, subtract, multiply and divide
! Change polarity
! Compare sources
! Absolute value
! PID
! Diameter calculator
! Scale information
! Switch between sources
The outputs from these functions can be
connected to other functions or used to control
the drive. The drive functions can be used to
write information directly to the following drive
controls;
! Analog outputs
! Speed reference
! Torque reference
! Multi-function outputs
! Digital Operator Monitors
This software provides the user the flexibility to
configure their own logic and to change it when
needed. It is one software flash that could
replace many.
To better understand what this software can do
it is necessary to understand the functions. It
is also necessary to understand how to enter
the configuration into the drive. The following
sections of this manual will explain how to use
and setup the functions.
This document is an addendum to Technical
Manual TM4515, listing the effect of this
software on the parameters in the drive and
function descriptions in the manual.
(1)
XXXXX refers to the base Model Number of the drive in which the software is installed.