0 startup procedure – Yaskawa G5 Eliminator User Manual
Page 20
Advertising
Date: 07/01/04, Rev: 04-07
Page 20 of 27
TM.G5SW.015
4.0 Startup
Procedure
1. Develop a configuration list.
2. Connect all external devices.
3. Perform the appropriate procedure for a standard drive startup.
4. Enter the configuration list into the User Parameters starting at A2-11.
5. Set the reference source to “Eliminator Ref” (b1-01 = 5).
6. Test the configuration using care to prevent damage to connected loads.
Advertising