Yaskawa GPD 515/G5 to F7 - Manual (Page 28)

Product Transition Guide
Appendix 2- Parameter Differences
____________________________
PL.F7.02.TransitionGuide 6/5/06
Page 28 of 40
Yaskawa Electric America, Inc
GPD515/G5 Parameters F7 Parameters
Parameter
No.
Name
(DigitalOperator
Display)
Setting or Selection
Parameter
No.
Name
(Digital Operator Display)
Remarks on
Setting or Selection
A1-01 Access Level
0: Operation Only
1: User Level
2: Quick-Start [Q]
3: Basic Level [B]
4: Advanced Level [A]
A1-01
Access Level Selection
0: Operation Only
1: User Level
Modified selection:
2: Advanced Level
B1-01 Reference Selection
0: Operator
1: Terminals
2: Communication Serial Com
3: Option PCB
4: EWS Reference from CP-717 b1-01 Reference Selection
Changed to:
4: Pulse Input
B1-02 Operation Method
Selection
0: Operator
1: Terminals
2: Communication Serial Com
3: Option PCB
4: EWSRun from CP-717 b1-02 Run Command
Selection
Removed selection 4:
4: EWSRun from CP-717
B1-04 Reverse Operation
Prohibit
0: Reverse Enabled
1: Reverse Disabled b1-04 Reverse Operation
Selection
Additional function:
2: Exchange Phase - Change
direction of forward motor
rotation.
B3-01 Speed Search
Selection at Start 0: Disabled
1: Enabled
b3-01 Speed Search Selection
Modified selections:
0: Speed Estimation Speed
Search Disable
1: Speed Estimation Speed
Search Enable
2: Current Detection Speed
Search Disable
3: Current Detection Speed
Search Enable
— — — b3-05 Speed Search Delay
Time New Parameter
— — — b3-10 Speed Search Detection
Compensation Gain New Parameter
— — — b3-14 Bi-directional Speed
Search Selection New Parameter
0: Disable .
1: Enable
— — — b5-15 Sleep Function Start
Level New Parameter
— — — b5-16 Sleep Delay Time New Parameter
— — — b5-17 PID Accel/Decel Time New Parameter
— — — b5-18 PID Setpoint Selection New Parameter
0:Disabled
1:Enabled
— — — b5-19 PID Setpoint Value New Parameter
B8-03
Energy -saving Mode
Selection 0:Disabled
1:Enabled b8-01 Energy Saving Control
Selection Changed Parameter No.
0: Disabled
1: Enabled
B8-04
Energy-saving
Control Gain — b8-02 Energy Saving Gain Changed Parameter No.
B8-05
Energy-saving
Control Time
Constant — b8-03 Energy Saving Control
Filter Time Constant Changed Parameter No.
— — — b8-04 Energy Saving
Coefficient Value New Parameter
— — — b8-05 Power Detection Filter
Time —
— — — b8-06 Search Operation
Voltage Limit —
C3-06
Output Voltage Limit
Operation Selection 0:Disabled
1:Enabled C3-05 Output Voltage Limit
Opera tion Selection Changed Parameter No.