Yaskawa GPD 515/G5 to F7 - Manual (Page 30)

Product Transition Guide
Appendix 2- Parameter Differences
____________________________
PL.F7.02.TransitionGuide 6/5/06
Page 30 of 40
Yaskawa Electric America, Inc
GPD515/G5 Parameters F7 Parameters
Parameter
No.
Name
(DigitalOperator
Display)
Setting or Selection
Parameter
No.
Name
(Digital Operator Display)
Remarks on
Setting or Selection
— — — d6-03 Magnetic Field Forcing
Function Selection New Parameter
0:Disabled
1:Enabled
E1-02 Motor Selection 0:Std Fan-Cooled
1:Std Blower-Cooled
2:Vector Motor L1-01 Motor Overload
Protection Selection Changed Parameter No.
Additional selection
0: Disabled
1: Standard Fan Cooled
2: Standard Blower Cooled
3: Vector Motor
— E2-11 Motor Rated Output New Parameter
This value is automatically set
during auto tuning.
E4-01 Motor 2 Max. Output
Frequency — E3-02 Motor 2 Maximum
Output Frequency Changed Parameter No.
E4-02 Motor 2
Max.Voltage — E3-03 Motor 2 Maximum
Output Voltage Changed Parameter No.
E4-03 Motor 2 Max.
Voltage Frequency
Base Frequency — E3-04 Motor 2 Base
Frequency
Base Frequency Changed Parameter No.
E4-04 Motor 2 Mid.
Output Frequency 1
Mid Frequency — E3-05 Motor 2 Mid Output
Frequency
Mid Frequency Changed Parameter No.
E4-05 Motor 2 Mid.
Output Frequency
Voltage 1
Mid Voltage — E3-06 Motor 2 Mid Output
Voltage VA
Mid Voltage Changed Parameter No.
E4-06 Motor 2 Min.
Output Frequency
Min Frequency — E3-07 Motor 2 Minimum
Output Frequency
Min Frequency Changed Parameter No.
E4-07 Motor 2 Min.
Output Frequency
Voltage
Min Voltage — E3-08 Motor 2 Minimum
Output Voltage
Min Voltage Changed Parameter No.
E5-01 Motor 2 Rated
Current — E4-01 Motor 2 Rated Current Changed Parameter No.
E5-02 Motor 2 Rated Slip — E4-02 Motor 2 Rated Slip Changed Parameter No.
E5-03 Motor 2
No-load Current — E4-03 Motor 2 No-Load
Current Changed Parameter No.
E5-04 Motor 2
Number of poles — E4-04 Motor 2 Number of
Poles Changed Parameter No.
E5-05 Motor 2 Line-to-line
Resistance — E4-05 Motor 2 Line-to-Line
Resistance Changed Parameter No.
E5-06 Motor 2 Leak
Inductance — E4-06 Motor 2 Leakage
Inductance Changed Parameter No.
— — — E4-07 Motor 2 Rated Output New Parameter
This value is automatically set
during auto-tuning.
— — — F4-07 AO-12 Channel 1
Signal Level New Parameter
Sets the range of the voltage
output.
0: 0 to 10 Vdc
1: -10 to +10 Vdc
— — — F4-08 AO-12 Channel 2
Signal Level
New Parameter
Sets the range of the voltage
output.
0: 0 to 10 Vdc
1: -10 to +10 Vdc