Yaskawa GPD 515/G5 to F7 - Manual (Page 39)

Product Transition Guide
Appendix 2- Parameter Differences
____________________________
PL.F7.02.TransitionGuide 6/5/06
Page 39 of 40
Yaskawa Electric America, Inc
GPD515/G5 Parameters F7 Parameters
Parameter
No.
Name
(DigitalOperator
Display)
Setting or Selection
Parameter
No.
Name
(Digital Operator Display)
Remarks on
Setting or Selection
— — —
o2-14
kWh User Monitor
Initialization New parameter
0: Disabled no change.
1: Enabled - Resets U1-29 to
zero and returns o2-14 to zero.
— — — o3-01 Copy Function
Selection New parameter
0: COPY SELECT no
function
1: INV -> OP READ - All
parameters are copied from
the Drive to the digital
operator.
2: OP -> INV WRITE - All
parameters are copied from
the digital operator to the
Drive.
3: OP<-->INV VERIFY -
Parameter settings in the
Drive are compared to those
in the digital operator.
NOTE: When using the copy
function, the Drive model
number o2-04, software
number U1-14, and control
method A1-02 must match or
an error will occur.
— — — o3-02 Copy Allowed
Selection
Read Allowable New parameter
0: Disabled - No digital
operator copy functions are
allowed.
1: Enabled - Copying allowed