Yaskawa GPD 515/G5 to G7 - Manual (Page 26)

Product Transition Guide
GPD515/G5 to G7
PL.G7.02.TransitionGuide 4/21/04
Page 26 of 38
Yaskawa Electric America, Inc
GPD515/G5 Parameters G7 Parameters
Parameter
No.
Name
(Digital Operator Display)
Setting or Selection
Parameter
No.
Name
(Digital Operator Display)
Remarks on
Setting or Selection
— — — d6-03 Magnetic Field Forcing
Function Selection New Parameter
0:Disabled
1:Enabled
E1-02
Motor Selection
0:Std Fan-Cooled
1:Std Blower-Cooled
2:Vector Motor
L1-01
Motor Overload Protection
Selection Changed Parameter No.
Additional selection
0: Disabled
1: Standard Fan Cooled
2: Standard Blower Cooled
3: Vector Motor
— E2-11 Motor Rated Output New Parameter
This value is automatically set during auto
tuning.
E3-01 Motor 2 Control Method
Selection
0: V/F control
1: V/F with PG Feedback
2: Open Loop Vector
3: Flux Vector E3-01 Motor 2 Control Method
Selection
Additional selection
4: Open Loop Vector Control 2
E4-01 Motor 2 Max. Output
Frequency
— E3-02 Motor 2 Maximum Output
Frequency Changed Parameter No.
E4-02 Motor 2 Max.Voltage — E3-03 Motor 2 Maximum Output
Voltage Changed Parameter No.
E4-03 Motor 2 Max.
Voltage Frequency
Base Frequency
— E3-04 Motor 2 Base Frequency
Base Frequency Changed Parameter No.
E4-04 Motor 2 Mid.
Output Frequency 1
Mid Frequency
— E3-05 Motor 2 Mid Output
Frequency
Mid Frequency Changed Parameter No.
E4-05 Motor 2 Mid.
Output Frequency
Voltage 1
Mid Voltage
— E3-06 Motor 2 Mid Output
Voltage VA
Mid Voltage Changed Parameter No.
E4-06 Motor 2 Min.
Output Frequency
Min Frequency
— E3-07 Motor 2 Minimum Output
Frequency
Min Frequency Changed Parameter No.
E4-07 Motor 2 Min.
Output Frequency
Voltage
Min Voltage
— E3-08 Motor 2 Minimum Output
Voltage
Min Voltage
Changed Parameter No.
E5-01 Motor 2 Rated Current — E4-01 Motor 2 Rated Current Changed Parameter No.
E5-02 Motor 2 Rated Slip — E4-02 Motor 2 Rated Slip Changed Parameter No.
E5-03 Motor 2
No-load Current
— E4-03 Motor 2 No-Load Current Changed Parameter No.
E5-04 Motor 2
Number of poles
— E4-04 Motor 2 Number of Poles Changed Parameter No.
E5-05 Motor 2 Line-to-line
Resistance
— E4-05 Motor 2 Line-to-Line
Resistance Changed Parameter No.
E5-06 Motor 2 Leak Inductance — E4-06 Motor 2 Leakage
Inductance Changed Parameter No.
— — — E4-07 Motor 2 Rated Output New Parameter
This value is automatically set during auto-
tuning.
— — — F4-07 AO-12 Channel 1 Signal
Level New Parameter
Sets the range of the voltage output.
0: 0 to 10 Vdc
1: -10 to +10 Vdc
— — — F4-08 AO-12 Channel 2 Signal
Level New Parameter
Sets the range of the voltage output.
0: 0 to 10 Vdc
1: -10 to +10 Vdc