Yaskawa MP2000iec Series - Manual

Quick Reference Guide
MPiec Series Controllers
• Set up the MP2300Siec and MP2310iec controller (Firmware 2.x)
• Set up the MP2600Siec controller (Firmware 2.x)
• Set the Front Panel Switches
• Set IP Address of PC (Windows 7)
• Establish Ethernet Communication between Controller and PC
• Download project to controller
• Login to Webserver
• Set IP Address of Controller
• Update firmware
• Save Project Archive (Backup controller and servo parameters)
• Load Project Archive
• Startup from Project Archive
• Clear Alarm A.810 (Initialize Absolute Encoders)
• Clear Alarm A.CC0
• Replace the controller
• Replace a Servopack (Mechatrolink)
• Replace ServoMotor
• Replace Battery
• Machine Operations and JAVA version
• Start MotionWorks IEC
• Open a saved project
• Open a zipped project
• Start a new project
• Save and Backup Project
• Set Project IP Address (Connect project to controller)
• Reset the MPiec controller back to factory settings
• Reset connected Servos to factory settings
• Clear Alarm A.810 (Initialize Absolute Encoders)
• Extract/Open the project stored in the controller
Modbus/TCP and Ethernet/IP
User Libraries
OPC Server
Logic Analyzer
Contents
Web Sever Procedures
MotionWorks IEC Procedures
Print Date: 1/23/2015