Yaskawa PLC-5 - Manual (Page 31)

PCDU TERMINAL OPERATION
28 Information Block 9 – MicroTrac Logic Input Allocation 6/28/94- RD 3196-10
Each logic input element (LOGI) of the PAC language allocates a
memory space in the source remote node. This information block of the
diagnostic displays shows the LOGI memory allocations in this
gateway. This is logic data to be written from the gateway to the drive
indicated by the node number. The channel number agrees with the
channel specified by the LOGI element.
LOGI NN-CCC-???? Where: NN is the node number of the
LOGI NN-CCC-???? MicroTrac Drive in hexadecimal
.... CCC is the channel number
???? is the data in hexadecimal
Each logic output element (LOGO) of the PAC language allocates a
memory space in the destination remote node. This information block
of the diagnostic displays shows the LOGO memory allocations in this
gateway. This is logic data to be written to the gateway from the drive
indicated by the node number. The channel number agrees with the
channel specified by the LOGO element.
LOGO NN-CCC-???? Where: NN is the node number of the
LOGO NN-CCC-???? MicroTrac Drive in hexadecimal
.... CCC is the subchannel number
???? is the data in hexadecimal
Each numeric input element (NUMI) of the PAC language allocates a
memory space in the source remote node. This information block of the
diagnostic displays shows the NUMI memory allocations in this
gateway. This is numeric data to be written from the gateway to the
drive indicated by the node number. The channel number agrees with
the channel specified by the NUMI element.
NUMI NN-CCC-???? Where: NN is the node number of the
NUMI NN-CCC-???? MicroTrac Drive in hexadecimal
....
CCC is the subchannel number
???? is the data in hexadecimal
Information
Block 9 –
MicroTrac
Logic Input
Allocation
Information
Block 10 –
MicroTrac
Logic Output
Allocation
Information
Block 11 –
MicroTrac
Numeric Input
Allocation