Yaskawa Junma Series SERVOPACK - Manual (Page 87)

7.3 Replacement of Cooling Fan
E-86
„ SJDE-08APA-OY SERVOPACKs
1. Open the case of the SERVOPACK.
Insert the tip of a straight-edge screwdriver
into the three notches on the case and the
two on the cover on the SERVOPACK one
by one and pry the case off.
2. Pull the case and the cover off of the
SERVOPACK.
3. Disconnect the cable of the cooling fan
from the fan connector on the SERVO-
PACK.
Case Front of
SERVOPACK
Pick the cable up,
and then pull it out.
Case
Cover
AP
A-
O Y