3 receiving, Option package contents, Tools required for installation – Yaskawa AC Drive-Option BRAKING UNIT-CDBR Spec.D User Manual
Page 11: 3receiving
YASKAWA ELECTRIC TOBP C720600 01C 1000-Series Option CDBR-D, LKEB- Installation Manual
11
3 Receiving
3
Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
nameplate. (Refer to
on page
for more information)
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Option Package Contents
■
CDBR Braking Unit
■
LKEB Braking Resistor Unit
◆
Tools Required for Installation
A Phillips screwdriver (M3.5 to M4 metric/#1, #2, and #3 U.S. standard size) is required to
install the option and wire the option terminal blocks.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
Description:
CDBR Braking Unit
Installation Manual (This Book)
–
Quantity:
1
1
Description:
LKEB Braking Resistor Unit
Installation Manual (This Book)
–
Quantity:
1
1
MANUAL
MANUAL
TOBP_C720600_01C_3_0_E.fm 11 ページ ２０１３年１０月７日 月曜日 午後２時２０分