Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 105)

H8951 3G/4G Router 5 Router config
(2014-07-01) - 89 -
Figure 5-65 Remote Log tab
Step 3 Configure “Remote Log” parameter.
Table 5-36 Remote log parameter instruction
Parameter Details Operation
Log Status To enable or disable remote log Click “Enable”
Remote IP or
Domain IP address or Domain of remote log
server To input the IP address or
domain to receive log
Remote Port Port of remote log serve Default port: 514
Step 4 Single click “save” icon to finish “Remote Log” parameter configuration.
A software tool Syslog is use to receive remote log in server. Syslog can be downloaded at website of
Hongdian
www.hongdian.com .
---END
5.7.4 Clock
Step 1 Log-on WEB GUI of H8951 3G/4G router.
Step 2 Click “System > Clock” to open “Clock” tab.