Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 96)

5 Router config H8951 3G/4G Router
(2014-07-01) - 80 -
IPIP tunnel is a simple agreement between two routers for IP packet encapsulation, IPIP
tunnel interface will be like a physical interface in the interface list, many routers including
Cisco, basically support the agreement. This agreement enables multiple network distribution
possible.
Step 1 Log-on WEB GUI of H8951 3G/4G router.
Step 2 Click “VPN > Tunnel” to open “Tunnel” tab.
Step 3 Click “Add” to add a new tunnel.
Figure 5-59 Tunnel configuration
Step 4 Configure Tunnel rule parameter
Table 5-32 Tunnel rule parameter instruction
Parameter Details Operation
IP Tunnel
Service To enable or disable IP tunnel
service Click “Enable”
Basic Settings
Tunnel name Name of the tunnel, cannot be
modified after save Input the name of tunnel
Tunnel Mode Tunnel mode:
 gre
 ipip
Select from Dropdown List