Hongdian H8951 3G/4G Wi-Fi router User Manual

Page 85

Advertising
background image

H8951 3G/4G Router

5 Router config

(2014-07-01)

- 69 -

Parameter

Details

Operation

Route”

When Routing Type is “Static Route”

Network

Set the destination IP address and
subnet mask of static route

Manual input
Format1: A.B.C.D/Mask

Gateway Type

Specify gateway type of static
routing, includes:

interface

static ip

Dropdown List

Gateway

Set a next hop IP address of static
route, IP address of the adjacent
router interface

Dropdown List

If the gateway type select static
IP, gateway need to manually
input, format: A.B.C.D

If the gateway type select
interface, the gateway needs to
select from dropdown list

When Routing Type is “Policy Route”

Source Type

Set source type of policy route

Dropdown List

Static IP

Interface

Network

When source type is static route,
need to manually set network
address

Manual input
Format1: A.B.C.D/Mask

Source Interface

When source type is policy route,
need to manually set source
network address of policy router

Dropdown List

modem

eth0

eth1

Gateway Type

Set the next hop IP of policy route

Dropdown List

static ip

interface

Gateway

When the gateway type select
"Static IP" to fill in the IP address,
when gateway type select the
"interface", it will select the
interfaces as gateway

Manual input
Format1: A.B.C.D/Mask

Prority

Set policy routing priority, the
priority lower the number, the
higher the priority

Value area:[3,252]

Step 4 Single click “save” icon to finish the static routing setting.

Static routing will select the route to forward according to the destination address of the packet receive
from the router, if the router received the packet(source address is 1.1.1.1 destination address is 2.2.2.2),

Advertising