Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 89)

H8951 3G/4G Router 5 Router config
(2014-07-01) - 73 -
Redistribute
Connected Enable or disable Redistribute
Connected Click the button to select.
 Enable

Disable
Redistribute
Static Enable or disable Redistribute
Static Click the button to select.
 Enable
 Disable
Redistribute
Kernel Enable or disable Redistribute
Kernel Click the button to select.

Enable
 Disable
Step 3 Click “Add” to add a new RIP route, configuration interface as Figure 5-54.
Figure 5-53 RIP route configuration interface
Step 4 Configure RIP route parameter instruction,as Table 5-27.
Table 5-28 RIP parameter instruction
Parameter Details Operation
Basic Setting
Add Type Add the type of RIP route Click the button to select Add Type
 When it is “Network”,need to
configure destination network address.
 When it is “Neighbor”,need to
configure neighbor’s IP address
Network(directly
connect to the
router) Add the destination
network of RIP route Add the destination network of RIP
route
Format: A.B.C.D/Mask
Neighbor(directly
connect to the
router) Add the neighbor’s IP
address of RIP route Add the neighbor’s IP address of RIP
route
Format: A.B.C.D
Step 5 Single click “save” icon to RIP route setting.