Hongdian H8951 3G/4G Wi-Fi router - Manual (Page 88)

5 Router config H8951 3G/4G Router
(2014-07-01) - 72 -
---END
5.5.5 Dynamic Routing(Optional)
RIP configuration
RIP protocol (Routing Information Protocol) is the most widely IGP (Interior Gateway
Protocol) , it was designed for the same technology used in small networks, and therefore
adapt to most of the campus network and used in a continuous regional networks that the rate
change is not big, H8951 3G/4G Router supports RIP v2 protocol. For more complex
environments, generally do not use the RIP protocol. RIP business is based on whether the
user needs the RIP at the factory H8951 3G/4G Router.
Step 1 Log-on WEB GUI of H8951 3G/4G router.
Step 2 Click “Forward > RIP” to open “RIP” tab, as Figure 5-53.
Figure 5-52 RIP interface
Parameter Instruction as Table 5-26.
Table 5-27 RIP Parameter Instruction
Parameter Details Operation
RIP Service Enable or disable RIP Service Click the button to select.
 Enable
 Disable