iSys iTerra Elite II Color LED Plotter - Manual (Page 12)

June 2011: Revision 002
12
iTerra Elite II Rear View
This view shows the connection panel, the rear output stacker and the location of the optional duplex (two-sided printing)
unit.
1. ON/OFF switch
2. AC power socket
3. Duplex unit (when fitted)
4. Rear, face up stacker
5. USB interface
6. ACC interface (host USB)
7. Network interface*
8. Parallel interface
* The Network Interface may have a protective “plug” which must be removed before connection can be made. This view
shows the connection panel, the rear output stacker and the location of the optional duplex (two-sided printing) unit.