iSys iTerra Elite II Color LED Plotter - Manual (Page 22)

June 2011: Revision 002
22
Media Set Up: Loading Paper into the Feeder, Option 1
STEP 1 STEP 2
Push the guide tray latches inward and pull the guide tray
forward about 12 inches. Open the guide door, load door and guide channels.
STEP 3 STEP 4
Place the paper in the tray with the Tick Mark facing up and
on the right to the front of the feeder. Lift the tension roller up and slide the paper between
both rollers
NOTE: Please ensure the rear face up stacker is open before printing fanfold paper.
Guide Door
Guide Tray Latches
Guide Door
Load Door
Tick Mark
Front of Feeder
Tension Rollers