iSys iTerra Elite II Color LED Plotter - Manual (Page 33)

June 2011: Revision 002
33
STEP 15 STEP 16
Check inside the cover for sheets in this area and
remove any that you find, and then close the cover. Pull out the paper tray and ensure all paper is stacked
properly, is undamaged, and that the paper guides
are properly positioned against the edge of the paper
stack. When satisfied replace the tray. Close the top
cover and press down firmly so the cover latch closes.
STEP 17
Pull out the paper guide tray, clear out any paper
jams. Reload fan fold paper and close the paper
guide tray.