iSys iTerra Elite II Color LED Plotter - Manual (Page 21)

June 2011: Revision 002
21
• Do not pull the paper tray out during printing (except as described below for the 2nd tray).
NOTES:
For face down printing, make sure the face up (rear) stacker (a) is closed (the paper exits from the top of the printer).
Stacking capacity is approximately 350 sheets for the Elite II, depending on paper weight.
For face up printing, make sure the face up (rear) stacker (a) is open and the paper support (b) is extended. Paper is
stacked in reverse order. Capacity is approximately 100 sheets of 20-lb. US Bond (75 g/m2) paper.
CAUTION: Do not open or close the rear paper exit while
printing as it may result in a paper jam.