iSys iTerra Elite II Color LED Plotter - Manual (Page 28)

June 2011: Revision 002
28
12. Paper Sensor Error Codes
Please refer to the message list below in the event you receive an error code on the feeder operator panel.
Message What To Do
Msg: Guide Door Open Ensure Guide Door is Closed
Msg: Guide Tray Out Push Guide Tray Completely into the Feeder.
Ensure Guide Tray Latches are Locked.
Msg: Close Guide Tray
Guide Door
Ensure Guide Door is Closed
Msg: Close Door/Tray Push Guide Tray Completely into the Feeder.
Ensure Guide Tray Latches are Locked.
Msg: Funnel Full Remove all Paper from the Guide.
Ensure No Paper Remains in the Guide Funnel.
Reload Fanfold Paper Manually.
Msg: Path Full Remove all Paper from the Guide.
Ensure No Paper Remains in the Guide Funnel.
Reload Fanfold Paper Manually. Please refer to the error list below in the event you receive an error code on the feeder operator panel.
Code # Location Code # Location
380 Paper Feed Upper 385 Fuser
381 Paper Transport 392 Paper Feed Lower
382 Paper Exit 10 - 11 Load Sensors
10-11
380
381 385
392
382