iSys iTerra Elite II Color LED Plotter - Manual (Page 24)

June 2011: Revision 002
24
STEP 9 STEP 10
Gently turn the roller until the media can be seen and
ensure the media is aligned straight. Close the guide channels and the load door.
STEP 11 STEP 12
Close the guide door. Slide in the guide tray; ensure the tray is fully latched.
When the Require Load message appears, press the
“Load” button.
The message
“STATUS: IDLE” should be displayed on
the feeder operator panel; you are ready to print.