Epson StylusPro10000 - Manual (Page 115)

5-11
Monitoring and Configuring the Printer | 5-11
Changing the Printer’s Code Page Setting
The printer uses the PC437 code page (U.S. and standard European
character sets) by default. You can use the control panel to change it to the
PC850 code page (multilingual character sets) if necessary. Follow these
steps:
1. Press the SelecType button. PRINTER SETTING MENU appears on
the display.
2. Press the Item button repeatedly until CODE PAGE=PC437* appears
on the display.
3. Press the + button. CODE PAGE=PC850 appears on the display.
4. Press the Enter button to save your setting.
5. Press the SelecType button to exit the Printer Setting menu.
Restoring Default Settings
You can erase all SelecType settings you have made and restore them to their
default values. Follow these steps:
1. Press the SelecType button. PRINTER SETTING MENU appears on
the display.
2. Press the Item button repeatedly until INIT. PANEL=EXEC . appears on
the display.
3. Press the Enter button to erase all settings and restore the defaults.
4. Press the SelecType button to exit the Printer Setting menu.